Legendaarisen Nexxus-sarjan huomattavasti järeämpi versio
Atacama Nexxus Pro Studio
The top of the range NeXXus Pro Studio version of the Award Winning* NeXXus Series speaker stands are perfect for professional use or for home hifi speaker support where only the best will do! Featuring twin 76.2mm (3”) tubes, they offer maximum mass loading potential for high end professional grade studio speakers.
This upgrade allows a significant increase of mass loading and improved stability to the speaker stand design, making the NeXXus Pro Studio specification an ideal choice for the serious music lover.
As an example, by opting for the NeXXus 600 Pro Studio specification, the maximum amount of Atabite filler has increased to 42.5kg compared to the NeXXus 600 Essential version, rated at 16.8Kg.
Each individual stand is equipped with twin 76.2mm tubes and the new 5mm thick laser cut “shield” design base plate along with a 130mm wide x 170mm deep top plate as standard.
If this sized top plate is not a suitable match for the supported speakers, a choice of *Three alternative sized top plates packs are available and can be purchased separately if required.
The increase in mass and stability also allows an increased weight capacity to be supported on each stand of 30kg, up from Essentials 15kg and Hifi Audio’s 22.5kg.
The spike interface features our biggest adjustable 8mm BZP spikes. (Previous model Nexus used 6mm spikes).
**Top plate pack dimensions (Width/Depth)
160mm x 220mm
140mm x 210mm
190mm x 305mm
Spike shoes– 2 x packs of Atacama HD-L spike shoes are recommended if the stands are being placed on a delicate floor covering.
Mass Loading Plate pack– This pack is compatible with NeXXus Series.
Gel Pads– NeXXus Pro Studio Specification come with the new High Load trapezoidal gel pads.
*Note- The 130mm x 170mm top plate pack is included with Nexxus speaker stands as standard. If you have selected one of the upgraded top plate packs, we suggest that the unused top plates be repurposed by attached them to the underneath of the base plates via the tube fastening bolts. This will increase the low-down mass of the stands, reduce base plate resonance, increased rigidity and will avoid the original top plates being misplaced should they be required later.
**The 180mm x 150mm Optional top plate pack is not suitable for NeXXus Pro Studio as the overall combined depth of the twin vertical tubes is deeper than the top plate.
Atacama NeXXus series speaker stands are designed and manufactured in the UK.
Erikokoiset päälevyt myydään erikseen.
Alaosan levykoko (L x S): 260mm x 365mm
Yläosan levykoko (L x S): 130mm x 170mm
Putken paksuus: 76.2mm
Maksimi kaiuttimen paino: 15kg/teline